Building Inspections Perth Western Australia
Building Inspections Perth Western Australia. If you are building a house in Perth, it is essential to have a building inspection performed. These are done by building inspectors. Building inspectors are individuals qualified to evaluate the building process and ensure that the it adheres to the Building Code of Australia.
Home » Blog »There are different stages of building inspection that can be performed by a building inspector. The following steps are followed when a full construction building inspection is done, i.e. because the building inspector is involved from the start of the construction process.
Slab Stage
The first stage of building inspection in Perth is the slab stage. This is the inspection that is done before the foundation can be laid. The building inspector will evaluate whether the area is ready for the slab work to be done. The building inspector determines if the correct area has been prepared, if reinforcements are adequate, if the concrete footings for the slabs is of high quality, whether drainage has been taken care of, waterproof barrier has been laid.
Post Slab Inspection
This stage of the building inspection may be included in the slab stage. Therefore, this stage takes place after the foundation has been laid. The building inspection ensures that the concrete slabs does not have any edge gaps as specified by the Building Code of Australia. It also looks for cracking at the joints, or flaking on the surface.
Frame Stage
The next stage of building construction in Perth comprises the inspection of the frame of the building. Therefore, the building inspector will ensure that brick-laying adheres to the Standards. After the wall have been built, they will be inspected once more, as will internal support structures. The heights and placements of window and door frames are checked. The strength of load bearing structures like lintels and timbers are assessed. The frame of the roof is reviewed.
Lock-up
During the lock-up stage of the building inspection, the building inspector will evaluate the roof, windows and doors. The inspector will ensure that plumbing and electricity has been laid in compliance with the Building Code of Australia, and that adequate waterproofing has been done for areas like showers.
Handover
Therefore, the final stage of the building inspection process in Perth is the Handover stage. This is after the structure has been built, and comprises of a thorough investigation of the building. The building inspector ensures that the conditions of the building plans and contract have been met and that everything is in compliance with the building Standards of Australia. Building Inspections Perth Western Australia.
Building inspections Perth,
